/* ramdisk.device has a maximum of 2048 blocks. It supports units 0 through 31 with flags: 1 - Recoverable. Data is preserved. 2 - Formatable and Diskcopyable. You can diskcopy to this drive. Note - Even though RamDisk is intelligent and will deallocate memory for unused tracks, a format or diskcopy will force the entire disk to be copied to memory before the deallocation starts. This is guarinteed to fragment memory. 4 - AutoBoot. Can boot from this drive. If this flag is set, then the disk is remounted automatically on warm boot. NOTE - Does Not Work with fastfilesystem. You will still have to mount devices which do not boot to DOS. Also, if BootPri is set higher than other devices, DOS will boot from this drive. For instance, to set up a disk which is both recoverable, and also is automatically mounted on warmboot use: 1 (Recoverable) + 4(AutoBoot) = 5 RamDisk uses the bitmap to deallocate unused sectors. Therefore, non- AMIGA disks cannot be copied to RamDisk. */ /* Our boot disk. */ Boot: Device = ramdisk.device Unit = 0 Flags = 7 Surfaces = 2 BlocksPerTrack = 11 Reserved = 2 Interleave = 0 LowCyl = 0 ; HighCyl = 79 Buffers = 1 BufMemType = 5 Mount = 1 BootPri =127 Priority = 5 # /* non-recoverable ram disk for lots of intermediate stuff. Use this for fast DiskCopy's */ Disk: Device = ramdisk.device Unit = 3 Flags = 6 Surfaces = 2 BlocksPerTrack = 11 Reserved = 2 Interleave = 0 LowCyl = 0 ; HighCyl = 79 Buffers = 1 BufMemType = 5 Mount = 1 BootPri = -128 Priority = 5 # /* an example of a ramdisk using the FastFileSystem */ Fast: Device = ramdisk.device Unit = 30 Flags = 1 Surfaces = 2 BlocksPerTrack = 11 Reserved = 2 Interleave = 0 LowCyl = 0 ; HighCyl = 79 Buffers = 1 BufMemType = 5 Mount = 1 GlobVec = -1 FileSystem = l:FastFileSystem MaxTransfer = 512 DosType = 0x444F5301 BootPri = -128 #