SCSIQuery 1.34 (15.12.2018) © THOR Generic sense data : Good. Device inquiry data : Device status : connected. Device class : direct access device. Fixed medium device. Device type modifier : 00. ISO version : 00. ECMA version : 00. ANSI version : SCSI-2. Response data format : SCSI-1 with CCS. Additional data length 7D. Flags: Relative addressing not supported. 32 bit wide SCSI not supported. 16 bit wide SCSI not supported. Synchron data transfer supported. Linked commands supported. Tagged queues not supported. Device reacts with hard reset. Vendor : QUANTUM Product : LP52S 950509405 Version : 2.6E Date : 06/04/90 Comment : 4102103175 Extended inquiry data : 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 47 45 4E 45 52 49 ..GENERI 43 20 20 20 20 20 20 20 C 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 ...... 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 00 00 00 ........ 00 00 00 00 00 ..... Control page information: Mode Data Length : 155 Medium Type : 0 Device specific : 0 Block des. len : 8 Density code : 0x0 Number of Blocks : 102171 Block Length : 512 Page code : 0x01 (Page can be saved in non-volatile memory) Page length : 6 Read write error recovery page: Automatic write reallocation disabled. Automatic read realloaction disabled. Do not return defective block to initiator. Tolerate delays to correct erraneous data. Use safest data correction first. Do not report recovered errors. Don't terminate data phase upon detection of recovered errors. Do not use error correction codes. Read retry count : 8 Data correction span : 11 bits Head offset count : 0 Strobe offset count : 0 Write retry count : 0 Recovery time limit : 0 ms Page code : 0x02 (Page can be saved in non-volatile memory) Page length : 10 Disconnect reconnect page: Buffer full ratio : 0 % Buffer empty ratio : 99 % Bus inactivity limit : 0 µs Disconnect time limit : 0 µs Connect time limit : 0 µs Maximum burst size : 0 bytes Disconnect control is not used. Page code : 0x08 (Page can be saved in non-volatile memory) Page length : 10 Cache control page: Return GOOD after having written data successfully. Prefetch data is absolute. READ cache utilized. Demand READ priority : Cache and medium have the same priority. Demand WRITE priority : Cache and medium have the same priority. Prefetch disable treshhold : 0 blocks Minimum prefetch : 0 blocks/factor Maximum prefetch : 64 blocks/factor Maximum prefetch ceiling : 0 blocks Page code : 0x0C (Page cannot be saved) Page length : 22 Notch page: *Device is notched. Notch boundaries based on physical blocks. Maximum number of notches : 3 Active notch : 0 Starting boundary : cylinder 0 head 0 Ending boundary : cylinder 1218 head 1 Notch depended pages mask : 0x0000000000001018 Page code : 0x32 (Page can be saved in non-volatile memory) Page length : 2 Printing RAW page data: 00 00 .. Page code : 0x37 (Page can be saved in non-volatile memory) Page length : 14 Printing RAW page data: 03 02 00 40 00 00 00 00 ...@.... 00 00 00 00 00 00 ...... Page code : 0x38 (Page cannot be saved) Page length : 14 Printing RAW page data: 5C 10 00 03 00 00 00 00 \....... 00 00 00 00 00 00 ...... Page code : 0x39 (Page can be saved in non-volatile memory) Page length : 6 Printing RAW page data: 00 00 00 00 00 00 ...... Page code : 0x03 (Page cannot be saved) Page length : 22 Device format page: Tracks per zone : 2 Spare zone sectors per zone : 1 Spare tracks per zone : 0 Spare tracks per LUN : 0 Sectors per tracks : 49 Bytes per sector : 512 Interleave : 1 Track skew factor : 9 Cylinder skew factor : 18 *Soft sector formatting supported. Hard sector formattting not supported. Removable media not supported. Allocate tracks from the same cylinder first. Page code : 0x04 (Page cannot be saved) Page length : 18 Rigid disk parameter page: Number of cylinders : 1219 Number of heads : 2 Start precompensation at cyl. : 0 Start reduced write at cyl. : 1229 Step rate : 0 ns Landing zone : 0 Spindle synchronization unsupported. Rotational offset : 0 Rotation rate : 0 rpm Parameters for notch 1: Page code : 0x0C (Page cannot be saved) Page length : 22 Notch page: *Device is notched. Notch boundaries based on physical blocks. Maximum number of notches : 3 Active notch : 1 Starting boundary : cylinder 0 head 0 Ending boundary : cylinder 453 head 1 Notch depended pages mask : 0x0000000000001018 Page code : 0x03 (Page cannot be saved) Page length : 22 Device format page: Tracks per zone : 2 Spare zone sectors per zone : 1 Spare tracks per zone : 0 Spare tracks per LUN : 0 Sectors per tracks : 49 Bytes per sector : 512 Interleave : 1 Track skew factor : 9 Cylinder skew factor : 18 *Soft sector formatting supported. Hard sector formattting not supported. Removable media not supported. Allocate tracks from the same cylinder first. Page code : 0x04 (Page cannot be saved) Page length : 18 Rigid disk parameter page: Number of cylinders : 454 Number of heads : 2 Start precompensation at cyl. : 0 Start reduced write at cyl. : 1229 Step rate : 0 ns Landing zone : 0 Spindle synchronization unsupported. Rotational offset : 0 Rotation rate : 0 rpm Parameters for notch 2: Page code : 0x0C (Page cannot be saved) Page length : 22 Notch page: *Device is notched. Notch boundaries based on physical blocks. Maximum number of notches : 3 Active notch : 2 Starting boundary : cylinder 454 head 0 Ending boundary : cylinder 835 head 1 Notch depended pages mask : 0x0000000000001018 Page code : 0x03 (Page cannot be saved) Page length : 22 Device format page: Tracks per zone : 2 Spare zone sectors per zone : 1 Spare tracks per zone : 0 Spare tracks per LUN : 0 Sectors per tracks : 42 Bytes per sector : 512 Interleave : 1 Track skew factor : 8 Cylinder skew factor : 16 *Soft sector formatting supported. Hard sector formattting not supported. Removable media not supported. Allocate tracks from the same cylinder first. Page code : 0x04 (Page cannot be saved) Page length : 18 Rigid disk parameter page: Number of cylinders : 382 Number of heads : 2 Start precompensation at cyl. : 0 Start reduced write at cyl. : 1229 Step rate : 0 ns Landing zone : 0 Spindle synchronization unsupported. Rotational offset : 0 Rotation rate : 0 rpm Parameters for notch 3: Page code : 0x0C (Page cannot be saved) Page length : 22 Notch page: *Device is notched. Notch boundaries based on physical blocks. Maximum number of notches : 3 Active notch : 3 Starting boundary : cylinder 836 head 0 Ending boundary : cylinder 1218 head 1 Notch depended pages mask : 0x0000000000001018 Page code : 0x03 (Page cannot be saved) Page length : 22 Device format page: Tracks per zone : 2 Spare zone sectors per zone : 1 Spare tracks per zone : 0 Spare tracks per LUN : 0 Sectors per tracks : 35 Bytes per sector : 512 Interleave : 1 Track skew factor : 7 Cylinder skew factor : 13 *Soft sector formatting supported. Hard sector formattting not supported. Removable media not supported. Allocate tracks from the same cylinder first. Page code : 0x04 (Page cannot be saved) Page length : 18 Rigid disk parameter page: Number of cylinders : 383 Number of heads : 2 Start precompensation at cyl. : 0 Start reduced write at cyl. : 1229 Step rate : 0 ns Landing zone : 0 Spindle synchronization unsupported. Rotational offset : 0 Rotation rate : 0 rpm Device capacity : Capacity in blocks : 102171. Block length : 512. Blocks from start up to a substiantial delay : Number of blocks : 49. Primary defect list: Format of defect list is bytes from index Cylinder : 858 Head : 1 Index : 5632 Cylinder : 1008 Head : 1 Index : 4096 Cylinder : 1128 Head : 0 Index : 11264 Grown defect list: Format of defect list is bytes from index