A3000 rev6.1 030@25MHz
2MB chipmem
1MB fastmem (standard memory, 8 x DIP GM71C4256A-80)
ROM timing at fastest 160ns setting (70ns MX27C2048 OTP EPROMs in U182 and U183):
 - Gives as high read bandwidth as the DIP fastmem when measuring with
   bustest so should be equivalent in performance to "Cpu FASTROM".
Super DMAC 390537-02
Ramsey 390541-04
WD33C93A 00-04
Samsung PM83 32GB mSATA SSD on mSATA->IDE adapter + Acard7722 IDE->SCSI bridge (7722 ATAPI bridge with 7726Q ATA firmware)

Kickstart 3.1
Workbench 3.1
scsi.device 40.12
Synchronous SCSI enabled via NVRAM Setting 


MKSoft ScsiSpeed 4.2  Copyright © 1989-92 MKSoft Development
------------------------------------------------------------
CPU: 68030  AmigaOS Version: 40.68  Normal Video DMA
Device: scsi.device:1
Comments: A3000, Synch Enabled, Acard7722+JM20330

CPU Speed Rating: 1377


Testing with a 512 byte, MEMF_FAST, LONG-aligned buffer.
Read from SCSI:    126617 bytes/sec  |  CPU Available: 19%

Testing with a 4096 byte, MEMF_FAST, LONG-aligned buffer.
Read from SCSI:    818995 bytes/sec  |  CPU Available: 29%

Testing with a 32768 byte, MEMF_FAST, LONG-aligned buffer.
Read from SCSI:   2652569 bytes/sec  |  CPU Available: 54%

Testing with a 262144 byte, MEMF_FAST, LONG-aligned buffer.
Read from SCSI:   3260497 bytes/sec  |  CPU Available: 70%

Testing with a 512 byte, MEMF_CHIP, LONG-aligned buffer.
Read from SCSI:    124953 bytes/sec  |  CPU Available: 19%

Testing with a 4096 byte, MEMF_CHIP, LONG-aligned buffer.
Read from SCSI:    809984 bytes/sec  |  CPU Available: 23%

Testing with a 32768 byte, MEMF_CHIP, LONG-aligned buffer.
Read from SCSI:   2657484 bytes/sec  |  CPU Available: 33%

Testing with a 262144 byte, MEMF_CHIP, LONG-aligned buffer.
Read from SCSI:   3276800 bytes/sec  |  CPU Available: 44%

Average CPU Available: 36%  |  CPU Availability index: 496